SPLUSS_TW_MOD

SPLUSS_TW_MOD (FB)

FUNCTION_BLOCK SPLUSS_TW_MOD

Representation

InOut:

Scope	Name	Type	Initial	Comment
Input	xEn	BOOL	TRUE	Enable / disable communication (TRUE = enabled)
Input	byUnitId	BYTE	0	Address of the device
Input	xUpdateActual	BOOL	FALSE	Update of actual values (on every rising edge )
Inout	ModbusClient	ModbusClientBase		Client of the device
Output	rTemp_4s	REAL		Temperature filtered 4s in XX.X degrees Celsius
Output	rTemp_32s	REAL		Temperature filtered 32s in XX.X degrees Celsius
Output	rrH_4s	REAL		Relative humidity filtered 4s in XX.X % RH
Output	rrH_32s	REAL		Relative humidity filtered 32s in XX.X % RH
Output	rDewPoint	REAL		Dew point temperature in XX.X degrees Celsius
Output	rAbsH_M3	REAL		Absolute humidity in XX.X g/m3
Output	rAbsH_KG	REAL		Absolute humidity in XX.X g/kg
Output	rEnthalpy	REAL		Enthalpy in XX.X kJ/kg
Output	xSensorOffsetInDevice	BOOL		Indicates whether sensor calibration must be performed in the device ( TRUE = calibration required in the device, FALSE = calibration required in the FB )
Output	xAlarm	BOOL	FALSE	Collective fault (TRUE = fault)
Output	xAlarmCom	BOOL	FALSE	Collective fault - communication (TRUE = fault)
Output	eErrorCodeCom	ModbusErrorCode		Error code - communication (0 = no error)
Output	eErrorCodeDev	SPLUSS_ERROR_CODE_TYPE_1		Error code - device (0 = no error)
Output	xBusy	BOOL		Communication indicator (TRUE = communication)
Input Const	tTimeUpdateActual	TIME	TIME#3s0ms	Update interval for the operations affected by the input 'xUpdateActual'