SPLUSS_RPTM2_MOD

SPLUSS_RPTM2_MOD (FB)

FUNCTION_BLOCK SPLUSS_RPTM2_MOD

InOut:

Scope	Name	Type	Initial	Comment
Input	xEn	BOOL	TRUE	Enable / disable communication ( TRUE = enabled )
Input	byUnitId	BYTE	0	Address of the device
Input	xUpdateActual	BOOL	FALSE	Update of actual values (on every rising edge )
Inout	ModbusClient	ModbusClientBase		Client of the device
Output	rTemp	REAL		Temperature unfiltered in XX.X degrees Celsius
Output	rTemp_1s	REAL		Temperature filtered 1s in XX.X degrees Celsius
Output	rTemp_10s	REAL		Temperature filtered 10s in XX.X degrees Celsius
Output	xSensorOffsetInDevice	BOOL		Indicator whether the calibration of the sensors must be performed in the device (TRUE = calibration in device required, FALSE = calibration in FB required)
Output	xAlarm	BOOL	FALSE	General fault ( TRUE = fault )
Output	xAlarmCom	BOOL	FALSE	General fault - communication ( TRUE = fault )
Output	eErrorCodeCom	ModbusErrorCode		Error code - communication ( 0 = no error )
Output	eErrorCodeDev	SPLUSS_ERROR_CODE_TYPE_1		Error code - device (0 = no error)
Output	xBusy	BOOL		Communication indicator ( TRUE = communication )
Input Const	rTempOffset	REAL	0.0	Constant measurement offset for the transmitted temperature - actual value
Input Const	xDisplayAvailable	BOOL	FALSE	Option 'Display' ( TRUE = The device is equipped with a display )
Input Const	tTimeUpdateActual	TIME	TIME#3s0ms	Update interval for operations influenced by the input 'xUpdateActual'