SPLUSS_2327_MOD_LCD

SPLUSS_2327_MOD_LCD (FB)

FUNCTION_BLOCK SPLUSS_2327_MOD_LCD

Representation

InOut:

Scope	Name	Type	Initial	Comment
Input	xEn	BOOL	TRUE	Enable / disable communication (TRUE = enable)
Input	byUnitId	BYTE	0	Device address
Input	xUpdateActual	BOOL	FALSE	Update of actual values (on every rising edge )
Input	xUpdateSetp	BOOL	FALSE	Update of setpoints (on every rising edge )
Inout	ModbusClient	ModbusClientBase		Client of the device
Output	rDifPressure	REAL		Differential pressure unfiltered in XXXX Pa
Output	rDifPressure_1s	REAL		Differential pressure filtered 1s in XXXX Pa
Output	rDifPressure_10s	REAL		Differential pressure filtered 10s in XXXX Pa
Output	xSensorOffsetInDevice	BOOL		Indication of whether the sensors must be calibrated in the device (TRUE = calibration in the device required, FALSE = calibration in the FB required)
Output	xAutoZeroAct	BOOL		Display of the execution of an auto-zero function (TRUE = function active)
Output	xAlarm	BOOL	FALSE	Collective fault (TRUE = fault)
Output	xAlarmCom	BOOL	FALSE	Collective fault - communication (TRUE = fault)
Output	eErrorCodeCom	ModbusErrorCode		Error code - communication (0 = no error)
Output	eErrorCodeDev	SPLUSS_ERROR_CODE_TYPE_1		Error code - device (0 = no error)
Output	xBusy	BOOL		Communication indicator (TRUE = communication)
Input Const	rDifPressureOffset	REAL	0.0	Constant measured value offset for the transmitted differential pressure - actual value
Input Const	xDisplayAvailable	BOOL	FALSE	Option Display (TRUE = The device is equipped with a display)
Input Const	xAutoZeroPress	BOOL	FALSE	Zero-point adjustment of the differential pressure measured value (at every rising edge)
Input Const	stDisplText	STRING(7)	powerIO	Any text with 7 characters (fixed length) in the bottom display line
Input Const	tTimeUpdateSetp	TIME	TIME#45s0ms	Update interval for the processes influenced by the input xUpdateSetp influenced
Input Const	tTimeUpdateActual	TIME	TIME#3s0ms	Update interval for the processes influenced by the input xUpdateActual influenced