SPLUSS_MWTM_MOD

SPLUSS_MWTM_MOD (FB)

FUNCTION_BLOCK SPLUSS_MWTM_MOD

Representation

InOut:

Scope	Name	Type	Initial	Comment
Input	xEn	BOOL	TRUE	Enable / disable communication (TRUE = enabled)
Input	byUnitId	BYTE	0	Address of the device
Input	xUpdateActual	BOOL	FALSE	Update of actual values (on every rising edge )
Inout	ModbusClient	ModbusClientBase		Client of the device
Output	rTemp	REAL		Temperature unfiltered in XX.X degrees Celsius
Output	rTemp_1s	REAL		Temperature filtered 1s in XX.X degrees Celsius
Output	rTemp_10s	REAL		Temperature filtered 10s in XX.X degrees Celsius
Output	xSensorOffsetInDevice	BOOL		Indicates whether sensor calibration must be performed in the device ( TRUE = calibration required in the device, FALSE = calibration required in the FB )
Output	xAlarm	BOOL	FALSE	Collective fault (TRUE = fault)
Output	xAlarmCom	BOOL	FALSE	Collective fault - communication (TRUE = fault)
Output	eErrorCodeCom	ModbusErrorCode		Error code - communication (0 = no error)
Output	eErrorCodeDev	SPLUSS_ERROR_CODE_TYPE_1		Error code - device (0 = no error)
Output	xBusy	BOOL		Communication indicator (TRUE = communication)
Input Const	rTempOffset	REAL	0.0	Constant measurement offset for the transmitted temperature - actual value
Input Const	xDisplayAvailable	BOOL	FALSE	Option 'Display' ( TRUE = The device is equipped with a display )
Input Const	tTimeUpdateActual	TIME	TIME#3s0ms	Update interval for the operations affected by the input 'xUpdateActual'