# POWERIO\_T1\_R310 ## `POWERIO_T1_R310` (FB) `FUNCTION_BLOCK` POWERIO\_T1\_R310 ### Representation
InOut: | Scope | Name | Type | Initial | Comment | | ----------- | ----------------------- | ------------------------------ | ---------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | Input | `xEn` | `BOOL` | TRUE | Enable / disable communication (TRUE = enable) | | Input | `byUnitId` | `BYTE` | 0 | Device address | | Input | `xUpdateActual` | `BOOL` | FALSE |

Update of actual values (on every rising edge
)

| | Input | `xUpdateStates` | `BOOL` | FALSE | Update of the states (on each rising edge) | | Input | `xUpdateSetp` | `BOOL` | FALSE |

Update of setpoints (on every rising edge
)

| | Input | `xResError` | `BOOL` | FALSE |

Reinitialization of the outputs eErrorCodeCom or
xErrorCodeDev to the fault-free state (on every rising edge)

| | Input | `xDO1` | `BOOL` | FALSE |

Definition of the state of digital output 1 (FET) (
FALSE = Off)

| | Input | `xDO2` | `BOOL` | FALSE |

Definition of the state of digital output 2 (FET) (
FALSE = Off)

| | Input | `xDO3` | `BOOL` | FALSE |

Definition of the state of digital output 3 (FET) (
FALSE = Off)

| | Input | `xDO4` | `BOOL` | FALSE |

Definition of the state of digital output 4 (FET) (
FALSE = Off)

| | Input | `xDO5` | `BOOL` | FALSE |

Definition of the state of digital output 5 (FET) (
FALSE = Off)

| | Input | `xDO6` | `BOOL` | FALSE |

Definition of the state of digital output 6 (FET) (
FALSE = Off)

| | Input | `xDO7` | `BOOL` | FALSE |

Definition of the state of digital output 7 (FET) (
FALSE = Off)

| | Input | `xDO8` | `BOOL` | FALSE |

Definition of the state of digital output 8 (FET) (
FALSE = Off)

| | Input | `xDO9` | `BOOL` | FALSE |

Definition of the state of digital output 9 (FET) (
FALSE = Off)

| | Input | `xDO10` | `BOOL` | FALSE |

Definition of the state of digital output 10 (FET) (
FALSE = Off)

| | Input | `xDO11` | `BOOL` | FALSE |

Definition of the state of digital output 11 (FET) (
FALSE = Off)

| | Input | `xDO12` | `BOOL` | FALSE |

Definition of the state of digital output 12 (FET) (
FALSE = Off)

| | Inout | `ModbusClient` | `ModbusClientBase` | | Client of the device | | Output | `xDI1` | `BOOL` | | State of digital input DI1 (FALSE = Off) | | Output | `xDI2` | `BOOL` | | State of digital input DI2 (FALSE = Off) | | Output | `xDO1_Fb` | `BOOL` | | State of digital output DO1 (FALSE = Off) | | Output | `xDO2_Fb` | `BOOL` | | State of digital output DO2 (FALSE = Off) | | Output | `xDO3_Fb` | `BOOL` | | State of digital output DO3 (FALSE = Off) | | Output | `xDO4_Fb` | `BOOL` | | State of digital output DO4 (FALSE = Off) | | Output | `xDO5_Fb` | `BOOL` | | State of digital output DO5 (FALSE = Off) | | Output | `xDO6_Fb` | `BOOL` | | State of digital output DO6 (FALSE = Off) | | Output | `xDO7_Fb` | `BOOL` | | State of digital output DO7 (FALSE = Off) | | Output | `xDO8_Fb` | `BOOL` | | State of digital output DO8 (FALSE = Off) | | Output | `xDO9_Fb` | `BOOL` | | State of digital output DO9 (FALSE = Off) | | Output | `xDO10_Fb` | `BOOL` | | State of digital output D10 (FALSE = Off) | | Output | `xDO11_Fb` | `BOOL` | | State of digital output D11 (FALSE = Off) | | Output | `xDO12_Fb` | `BOOL` | | State of digital output D12 (FALSE = Off) | | Output | `eAOO_DO1` | eManBin | | State of the manual override at digital output DO1 | | Output | `eAOO_DO2` | eManBin | | State of the manual override at digital output DO2 | | Output | `eAOO_DO3` | eManBin | | State of the manual override at digital output DO3 | | Output | `eAOO_DO4` | eManBin | | State of the manual override at digital output DO4 | | Output | `eAOO_DO5` | eManBin | | State of the manual override at digital output DO5 | | Output | `eAOO_DO6` | eManBin | | State of the manual override at digital output DO6 | | Output | `eAOO_DO7` | eManBin | | State of the manual override at digital output DO7 | | Output | `eAOO_DO8` | eManBin | | State of manual override at digital output DO8 | | Output | `eAOO_DO9` | eManBin | | State of manual override at digital output DO9 | | Output | `eAOO_DO10` | eManBin | | State of manual override at digital output DO10 | | Output | `eAOO_DO11` | eManBin | | State of manual override at digital output DO11 | | Output | `eAOO_DO12` | eManBin | | State of manual override at digital output DO12 | | Output | `rAI1_PT1000` | `REAL` | |

Actual temperature value at analog input 1 (PT1000) (
-30.0°C = short circuit / interruption)

| | Output | `xAlarm_AI1_PT1000` | `BOOL` | FALSE |

Fault - short circuit / interruption of analog input 1 (
PT1000) (TRUE = fault)

| | Output | `rAI2_PT1000` | `REAL` | |

Actual temperature value at analog input 2 (PT1000) (
-30.0°C = short circuit / interruption)

| | Output | `xAlarm_AI2_PT1000` | `BOOL` | FALSE |

Fault - short circuit / interruption of analog input 2 (
PT1000) (TRUE = fault)

| | Output | `xSensorOffsetInDevice` | `BOOL` | |

Indication of whether the sensors must be calibrated in the device
(TRUE = calibration in the device required, FALSE = calibration in the
FB required)

| | Output | `wTypeID` | `WORD` | | Device identification | | Output | `wFirmwareVer` | `WORD` | | Firmware version of the device | | Output | `xAlarm` | `BOOL` | FALSE | Collective fault (TRUE = fault) | | Output | `xAlarmCom` | `BOOL` | FALSE | Collective fault - communication (TRUE = fault) | | Output | `eErrorCodeCom` | ModbusErrorCode | | Error code - communication (0 = no error) | | Output | `eErrorCodeDev` | POWERIO\_T1\_R310\_ERROR\_CODE | POWERIO\_T1\_R310\_ERROR\_CODE.NO\_ERROR | Error code - device (0 = no error) | | Output | `xBusy` | `BOOL` | | Communication indicator (TRUE = communication) | | Input Const | `rAI2_PT1000Offset` | `REAL` | 0.0 |

Constant measured value offset for the transmitted resistance
- actual value 2

| | Input Const | `rAI1_PT1000Offset` | `REAL` | 0.0 |

Constant measured value offset for the transmitted resistance
- actual value 1

| | Input Const | `xDO12_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 12 in safe-state operation (FALSE
= Off)

| | Input Const | `xDO11_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 11 in safe-state operation (FALSE
= Off)

| | Input Const | `xDO10_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 10 in safe-state operation (FALSE
= Off)

| | Input Const | `xDO9_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 9 in safe-state operation (FALSE =
Off)

| | Input Const | `xDO8_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 8 in safe state mode (FALSE =
Off)

| | Input Const | `xDO7_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 7 in safe state mode (FALSE =
Off)

| | Input Const | `xDO6_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 6 in safe state mode (FALSE =
Off)

| | Input Const | `xDO5_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 5 in safe state mode (FALSE =
Off)

| | Input Const | `xDO4_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 4 in safe state mode (FALSE =
Off)

| | Input Const | `xDO3_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 3 in safe state mode (FALSE =
Off)

| | Input Const | `xDO2_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 2 in safe state mode (FALSE =
Off)

| | Input Const | `xDO1_SafeState_Sta` | `BOOL` | FALSE |

State of digital output 1 in safe state mode (FALSE =
Off)

| | Input Const | `xDO12_SafeState_En` | `BOOL` | FALSE |

Enable / disable digital output 12 for safe-state
operation (TRUE = enable)

| | Input Const | `xDO11_SafeState_En` | `BOOL` | FALSE |

Enable / disable digital output 11 for safe-state
operation (TRUE = enable)

| | Input Const | `xDO10_SafeState_En` | `BOOL` | FALSE |

Enable / disable digital output 10 for safe-state
operation (TRUE = enable)

| | Input Const | `xDO9_SafeState_En` | `BOOL` | FALSE |

Enable / disable digital output 9 for safe-state
operation (TRUE = enable)

| | Input Const | `xDO8_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 8 for safe state
mode (TRUE = enable)

| | Input Const | `xDO7_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 7 for safe state
mode (TRUE = enable)

| | Input Const | `xDO6_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 6 for safe state
mode (TRUE = enable)

| | Input Const | `xDO5_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 5 for safe state
mode (TRUE = enable)

| | Input Const | `xDO4_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 4 for safe state
mode (TRUE = enable)

| | Input Const | `xDO3_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 3 for safe state
mode (TRUE = enable)

| | Input Const | `xDO2_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 2 for safe state
mode (TRUE = enable)

| | Input Const | `xDO1_SafeState_En` | `BOOL` | FALSE |

Enable / lock digital output 1 for safe state
mode (TRUE = enable)

| | Input Const | `tTimeSafeState` | `TIME` | TIME#0ms |

Duration for activation of the state Safestate in the event of
communication failure (integer multiples of 1s)

| | Input Const | `tTimeUpdateStates` | `TIME` | TIME#500ms |

Update interval for the processes influenced by the input
xUpdateStates influenced

| | Input Const | `tTimeMinChangeValue` | `TIME` | TIME#0ms |

Minimum time before transmitting a setpoint
based on a detected value change

| | Input Const | `tTimeUpdateSetp` | `TIME` | TIME#45s0ms |

Update interval for the processes influenced by the input
xUpdateSetp influenced

| | Input Const | `tTimeUpdateActual` | `TIME` | TIME#3s0ms |

Update interval for the processes influenced by the input
xUpdateActual influenced

| --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://support.powerio.com/hub/codesys-hvac/en/hvac-modbus-library/functionblocks/powerio/powerio_t1_r310.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.