> For the complete documentation index, see [llms.txt](https://support.powerio.com/hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.powerio.com/hub/codesys-hvac/en/hvac-modbus-library/functionblocks/powerio/powerio_t1_r300.md).

# POWERIO\_T1\_R300

## `POWERIO_T1_R300` (FB)

`FUNCTION_BLOCK` POWERIO\_T1\_R300

### Representation

<figure><img src="https://2592874069-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FQR4vCFzt6ixgsqlR3pdR%2Fuploads%2F6frrc1JyheakkA2yS5hb%2FHVACModbus.POWERIO_T1_R300.png?alt=media&amp;token=7b419b25-2e1e-4b2a-a39c-940d610729b5" alt=""><figcaption></figcaption></figure>

InOut:

| Scope       | Name                    | Type                           | Initial                                  | Comment                                                                                                                                                          |
| ----------- | ----------------------- | ------------------------------ | ---------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Input       | `xEn`                   | `BOOL`                         | TRUE                                     | Enable / disable communication (TRUE = enable)                                                                                                                   |
| Input       | `byUnitId`              | `BYTE`                         | 0                                        | Address of the device                                                                                                                                            |
| Input       | `xUpdateActual`         | `BOOL`                         | FALSE                                    | <p>Update of actual values (on every rising edge<br>)</p>                                                                                                        |
| Input       | `xUpdateStates`         | `BOOL`                         | FALSE                                    | <p>State update (on every rising edge<br>)</p>                                                                                                                   |
| Input       | `xUpdateSetp`           | `BOOL`                         | FALSE                                    | <p>Update of setpoints (on every rising edge<br>)</p>                                                                                                            |
| Input       | `xResError`             | `BOOL`                         | FALSE                                    | <p>Reinitialization of the outputs <code>eErrorCodeCom</code> or<br><code>xErrorCodeDev</code> to the fault-free state (at each<br>rising edge)</p>              |
| Input       | `xDO1`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 1 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO2`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 2 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO3`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 3 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO4`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 4 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO5`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 5 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO6`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 6 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO7`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 7 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Input       | `xDO8`                  | `BOOL`                         | FALSE                                    | <p>Setting the state of digital output 8 (FET) (<br>FALSE = Off)</p>                                                                                             |
| Inout       | `ModbusClient`          | `ModbusClientBase`             |                                          | Client of the device                                                                                                                                             |
| Output      | `xDI1`                  | `BOOL`                         |                                          | State of digital input DI1 (FALSE = Off)                                                                                                                         |
| Output      | `xDI2`                  | `BOOL`                         |                                          | State of digital input DI2 (FALSE = Off)                                                                                                                         |
| Output      | `xDO1_Fb`               | `BOOL`                         |                                          | State of digital output DO1 (FALSE = Off)                                                                                                                        |
| Output      | `xDO2_Fb`               | `BOOL`                         |                                          | State of digital output DO2 (FALSE = Off)                                                                                                                        |
| Output      | `xDO3_Fb`               | `BOOL`                         |                                          | State of digital output DO3 (FALSE = Off)                                                                                                                        |
| Output      | `xDO4_Fb`               | `BOOL`                         |                                          | State of digital output DO4 (FALSE = Off)                                                                                                                        |
| Output      | `xDO5_Fb`               | `BOOL`                         |                                          | State of digital output DO5 (FALSE = Off)                                                                                                                        |
| Output      | `xDO6_Fb`               | `BOOL`                         |                                          | State of digital output DO6 (FALSE = Off)                                                                                                                        |
| Output      | `xDO7_Fb`               | `BOOL`                         |                                          | State of digital output DO7 (FALSE = Off)                                                                                                                        |
| Output      | `xDO8_Fb`               | `BOOL`                         |                                          | State of digital output DO8 (FALSE = Off)                                                                                                                        |
| Output      | `xStateDevGreen`        | `BOOL`                         |                                          | State of status LED Green (TRUE = On)                                                                                                                            |
| Output      | `xStateDevRed`          | `BOOL`                         |                                          | State of status LED Red (TRUE = On)                                                                                                                              |
| Output      | `rAI1_PT1000`           | `REAL`                         |                                          | <p>Actual temperature value at analog input 1 (PT1000) (<br>-30.0°C = short circuit / interruption)</p>                                                          |
| Output      | `xAlarm_AI1_PT1000`     | `BOOL`                         | FALSE                                    | <p>Fault - short circuit / interruption of analog input 1 (<br>PT1000) (TRUE = fault)</p>                                                                        |
| Output      | `rAI2_PT1000`           | `REAL`                         |                                          | <p>Actual temperature value at analog input 2 (PT1000) (<br>-30.0°C = short circuit / interruption)</p>                                                          |
| Output      | `xAlarm_AI2_PT1000`     | `BOOL`                         | FALSE                                    | <p>Fault - short circuit / interruption of analog input 2 (<br>PT1000) (TRUE = fault)</p>                                                                        |
| Output      | `xSensorOffsetInDevice` | `BOOL`                         |                                          | <p>Indication whether the sensors must be calibrated in the device<br>(TRUE = calibration in the device required, FALSE = calibration in<br>the FB required)</p> |
| Output      | `wTypeID`               | `WORD`                         |                                          | Device identification                                                                                                                                            |
| Output      | `wFirmwareVer`          | `WORD`                         |                                          | Firmware version of the device                                                                                                                                   |
| Output      | `xAlarm`                | `BOOL`                         | FALSE                                    | Collective fault (TRUE = fault)                                                                                                                                  |
| Output      | `xAlarmCom`             | `BOOL`                         | FALSE                                    | Collective fault - communication (TRUE = fault)                                                                                                                  |
| Output      | `eErrorCodeCom`         | ModbusErrorCode                |                                          | Error code - communication (0 = no error)                                                                                                                        |
| Output      | `eErrorCodeDev`         | POWERIO\_T1\_R300\_ERROR\_CODE | POWERIO\_T1\_R300\_ERROR\_CODE.NO\_ERROR | Error code - device (0 = no error)                                                                                                                               |
| Output      | `xBusy`                 | `BOOL`                         |                                          | Communication indicator (TRUE = communication)                                                                                                                   |
| Input Const | `rAI2_PT1000Offset`     | `REAL`                         | 0.0                                      | <p>Constant measured value offset for the transmitted resistance<br>- actual value 2</p>                                                                         |
| Input Const | `rAI1_PT1000Offset`     | `REAL`                         | 0.0                                      | <p>Constant measured value offset for the transmitted resistance<br>- actual value 1</p>                                                                         |
| Input Const | `xDO8_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 8 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO7_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 7 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO6_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 6 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO5_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 5 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO4_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 4 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO3_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 3 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO2_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 2 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO1_SafeState_Sta`    | `BOOL`                         | FALSE                                    | <p>State of digital output 1 in safe state mode (FALSE =<br>Off)</p>                                                                                             |
| Input Const | `xDO8_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 8 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO7_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 7 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO6_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 6 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO5_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 5 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO4_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 4 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO3_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 3 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO2_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 2 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `xDO1_SafeState_En`     | `BOOL`                         | FALSE                                    | <p>Enable / blocking of digital output 1 for safe state<br>mode (TRUE = enable)</p>                                                                              |
| Input Const | `tTimeSafeState`        | `TIME`                         | TIME#0ms                                 | <p>Time duration for the activation of the state <code>Safestate</code> in the event of<br>communication failure (integer multiples of 1s)</p>                   |
| Input Const | `tTimeUpdateStates`     | `TIME`                         | TIME#500ms                               | <p>Update interval for the operations that are influenced by the input<br><code>xUpdateStates</code> influenced</p>                                              |
| Input Const | `tTimeMinChangeValue`   | `TIME`                         | TIME#0ms                                 | <p>Minimum time before transmitting a setpoint<br>based on a detected change in value</p>                                                                        |
| Input Const | `tTimeUpdateSetp`       | `TIME`                         | TIME#45s0ms                              | <p>Update interval for the operations that are influenced by the input<br><code>xUpdateSetp</code> influenced</p>                                                |
| Input Const | `tTimeUpdateActual`     | `TIME`                         | TIME#3s0ms                               | <p>Update interval for the operations that are influenced by the input<br><code>xUpdateActual</code> influenced</p>                                              |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://support.powerio.com/hub/codesys-hvac/en/hvac-modbus-library/functionblocks/powerio/powerio_t1_r300.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
