POWERIO_T1_R100

POWERIO_T1_R100 (FB)

FUNCTION_BLOCK POWERIO_T1_R100

Representation

InOut:

Scope	Name	Type	Initial	Comment
Input	xEn	BOOL	TRUE	Enable / disable communication (TRUE = enable)
Input	byUnitId	BYTE	0	Device address
Input	xUpdateActual	BOOL	FALSE	Update of actual values (on every rising edge )
Input	xUpdateStates	BOOL	FALSE	Update of the states (on each rising edge)
Input	xUpdateSetp	BOOL	FALSE	Update of setpoints (on every rising edge )
Input	xResError	BOOL	FALSE	Reinitialization of the outputs eErrorCodeCom or xErrorCodeDev to the fault-free state (on every rising edge)
Input	xDO1	BOOL	FALSE	Definition of the state of digital output 1 (FET) ( FALSE = Off)
Input	xDO2	BOOL	FALSE	Definition of the state of digital output 2 (FET) ( FALSE = Off)
Input	xDO3	BOOL	FALSE	Definition of the state of digital output 3 (FET) ( FALSE = Off)
Input	xDO4	BOOL	FALSE	Definition of the state of digital output 4 (FET) ( FALSE = Off)
Input	xDO5	BOOL	FALSE	Setting the state of digital output 5 (relay) ( FALSE = Off)
Input	xDO6	BOOL	FALSE	Setting the state of digital output 6 (relay) ( FALSE = Off)
Input	xDO7	BOOL	FALSE	Setting the state of digital output 7 (relay) ( FALSE = Off)
Input	rAO1	REAL	0.0	Setting the state at analog output 1 (0.0 - 100.0% corresponding to 0.000 - 10.000 V))
Inout	ModbusClient	ModbusClientBase		Client of the device
Output	xDI1	BOOL		State of digital input DI1 (FALSE = Off)
Output	xDI2	BOOL		State of digital input DI2 (FALSE = Off)
Output	xDI3	BOOL		State of digital input DI3 (FALSE = Off)
Output	xDI4	BOOL		State of digital input DI4 (FALSE = Off)
Output	xDI5	BOOL		State of digital input DI5 (FALSE = Off)
Output	xDI6	BOOL		State of digital input DI6 (FALSE = Off)
Output	xDO1_Fb	BOOL		State of digital output DO1 (FALSE = Off)
Output	xDO2_Fb	BOOL		State of digital output DO2 (FALSE = Off)
Output	xDO3_Fb	BOOL		State of digital output DO3 (FALSE = Off)
Output	xDO4_Fb	BOOL		State of digital output DO4 (FALSE = Off)
Output	xDO5_Fb	BOOL		State of digital output DO5 (FALSE = Off)
Output	xDO6_Fb	BOOL		State of digital output DO6 (FALSE = Off)
Output	xDO7_Fb	BOOL		State of digital output DO7 (FALSE = Off)
Output	eAOO_DO1	eManBin		State of the manual override at digital output DO1
Output	eAOO_DO2	eManBin		State of the manual override at digital output DO2
Output	eAOO_DO3	eManBin		State of the manual override at digital output DO3
Output	eAOO_DO4	eManBin		State of the manual override at digital output DO4
Output	eAOO_DO5	eManBin		State of the manual override at digital output DO5
Output	eAOO_DO6	eManBin		State of the manual override at digital output DO6
Output	eAOO_DO7	eManBin		State of the manual override at digital output DO7
Output	eAO_AO1	eManNum		State of the manual override at analog output AO1
Output	xStateDevGreen	BOOL		State of status LED green (TRUE = On)
Output	xStateDevRed	BOOL		State of status LED red (TRUE = On)
Output	rAI1	REAL		Actual value of the voltage at analog input 1 (0.0 - 10.0 V)
Output	rAI2_PT1000	REAL		Actual temperature value at analog input 2 (PT1000) ( -30.0°C = short circuit / interruption)
Output	xAlarm_AI2_PT1000	BOOL	FALSE	Fault - short circuit / interruption of analog input 2 ( PT1000) (TRUE = fault)
Output	rAI2_Resist	REAL		Actual value of the resistance at analog input 2 (XXXX Ohm)
Output	xSensorOffsetInDevice	BOOL		Indication of whether the sensors must be calibrated in the device (TRUE = calibration in the device required, FALSE = calibration in the FB required)
Output	wTypeID	WORD		Device identification
Output	wFirmwareVer	WORD		Firmware version of the device
Output	xAlarm	BOOL	FALSE	Collective fault (TRUE = fault)
Output	xAlarmCom	BOOL	FALSE	Collective fault - communication (TRUE = fault)
Output	eErrorCodeCom	ModbusErrorCode		Error code - communication (0 = no error)
Output	eErrorCodeDev	POWERIO_T1_R100_ERROR_CODE	POWERIO_T1_R100_ERROR_CODE.NO_ERROR	Error code - device (0 = no error)
Output	xBusy	BOOL		Communication indicator (TRUE = communication)
Input Const	rAI2_ResistOffset	REAL	0.0	Constant measurement offset for the transmitted resistance actual value
Input Const	rAI2_PT1000Offset	REAL	0.0	Constant measured-value offset for the transmitted temperature actual value
Input Const	rAO1_SafeState_Sta	REAL	0.0	State of analog output 1 in safe state mode (0.000 … +10.000 V)
Input Const	xDO7_SafeState_Sta	BOOL	FALSE	State of digital output 7 in safe state mode (FALSE = Off)
Input Const	xDO6_SafeState_Sta	BOOL	FALSE	State of digital output 6 in safe state mode (FALSE = Off)
Input Const	xDO5_SafeState_Sta	BOOL	FALSE	State of digital output 5 in safe state mode (FALSE = Off)
Input Const	xDO4_SafeState_Sta	BOOL	FALSE	State of digital output 4 in safe state mode (FALSE = Off)
Input Const	xDO3_SafeState_Sta	BOOL	FALSE	State of digital output 3 in safe state mode (FALSE = Off)
Input Const	xDO2_SafeState_Sta	BOOL	FALSE	State of digital output 2 in safe state mode (FALSE = Off)
Input Const	xDO1_SafeState_Sta	BOOL	FALSE	State of digital output 1 in safe state mode (FALSE = Off)
Input Const	xAO1_SafeState_En	BOOL	FALSE	Enable / disable analog output 1 for safe state mode (TRUE = enable)
Input Const	xDO7_SafeState_En	BOOL	FALSE	Enable / lock digital output 7 for safe state mode (TRUE = enable)
Input Const	xDO6_SafeState_En	BOOL	FALSE	Enable / lock digital output 6 for safe state mode (TRUE = enable)
Input Const	xDO5_SafeState_En	BOOL	FALSE	Enable / lock digital output 5 for safe state mode (TRUE = enable)
Input Const	xDO4_SafeState_En	BOOL	FALSE	Enable / lock digital output 4 for safe state mode (TRUE = enable)
Input Const	xDO3_SafeState_En	BOOL	FALSE	Enable / lock digital output 3 for safe state mode (TRUE = enable)
Input Const	xDO2_SafeState_En	BOOL	FALSE	Enable / lock digital output 2 for safe state mode (TRUE = enable)
Input Const	xDO1_SafeState_En	BOOL	FALSE	Enable / lock digital output 1 for safe state mode (TRUE = enable)
Input Const	tTimeSafeState	TIME	TIME#0ms	Duration for activation of the state Safestate in the event of communication failure (integer multiples of 1s, minimum 5s)
Input Const	tTimeMinChangeValue	TIME	TIME#0ms	Minimum time before transmitting a setpoint based on a detected value change
Input Const	tTimeUpdateSetp	TIME	TIME#45s0ms	Update interval for the processes influenced by the input xUpdateSetp influenced
Input Const	tTimeUpdateStates	TIME	TIME#500ms	Update interval for the processes influenced by the input xUpdateStates influenced
Input Const	tTimeUpdateActual	TIME	TIME#3s0ms	Update interval for the processes influenced by the input xUpdateActual influenced