THERMOKON_NOVOS_TOUCH

THERMOKON_NOVOS_TOUCH (FB)

FUNCTION_BLOCK THERMOKON_NOVOS_TOUCH

Representation

InOut:

Scope	Name	Type	Initial	Comment
Input	xEn	BOOL	TRUE	Enable / disable communication (TRUE = enable)
Input	byUnitId	BYTE	0	Device address (1 .. 247)
Input	xUpdateActual	BOOL	FALSE	Update of actual values (on every rising edge )
Input	xUpdateStates	BOOL	FALSE	Update of the states (on each rising edge)
Input	xUpdateSetp	BOOL	FALSE	Update of setpoints (on every rising edge )
Input	xUpdateConfig	BOOL	FALSE	Update of the configuration (on each rising edge)
Input	xResError	BOOL	FALSE	Reinitialization of the outputs eErrorCodeCom or stErrorCodeDev to the fault-free state (on every rising edge)
Input	rSetpTempBase	REAL	22.0	Base setpoint temperature (degrees Celsius)
Input	rSetpTempOffset	REAL	3.0	Setpoint temperature adjustment range (symmetric, +/-)
Input	eFanSpeed	THERMOKON_NOVOS_TOUCH_FAN_SPEED_CODE	THERMOKON_NOVOS_TOUCH_FAN_SPEED_CODE.OFF	Fan speed level (0 = OFF, 1 .. 5 = levels 1 .. 5, 6 = AUTO, 7 .. 12 = Auto level 0 - 5)
Input	xLight_1	BOOL	FALSE	Enable / disable lighting 1 (TRUE = enable)
Input	rBrightLight_1	REAL	0.0	Brightness of lighting 1 (100.0 = maximum)
Input	xLight_2	BOOL	FALSE	Enable / disable lighting 2 (TRUE = enable)
Input	rBrightLight_2	REAL	0.0	Brightness of lighting 2 (100.0 = maximum)
Input	xLight_3	BOOL	FALSE	Enable / disable lighting 3 (TRUE = enable)
Input	rBrightLight_3	REAL	0.0	Brightness of lighting 3 (100.0 = maximum)
Input	xLight_4	BOOL	FALSE	Enable / disable lighting 4 (TRUE = enable)
Input	rBrightLight_4	REAL	0.0	Brightness of lighting 4 (100.0 = maximum)
Input	xLight_5	BOOL	FALSE	Enable / disable lighting 5 (TRUE = enable)
Input	rBrightLight_5	REAL	0.0	Brightness of lighting 5 (100.0 = maximum)
Input	xLight_6	BOOL	FALSE	Enable / disable lighting 6 (TRUE = enable)
Input	rBrightLight_6	REAL	0.0	Brightness of lighting 6 (100.0 = maximum)
Input	xLight_7	BOOL	FALSE	Enable / disable lighting 7 (TRUE = enable)
Input	rBrightLight_7	REAL	0.0	Brightness of lighting 7 (100.0 = maximum)
Input	xLight_8	BOOL	FALSE	Enable / disable lighting 8 (TRUE = enable)
Input	rBrightLight_8	REAL	0.0	Brightness of lighting 8 (100.0 = maximum)
Input	xScene_1	BOOL	FALSE	Enable / disable scene 1 (TRUE = enable)
Input	xScene_2	BOOL	FALSE	Enable / disable scene 2 (TRUE = enable)
Input	xScene_3	BOOL	FALSE	Enable / disable scene 3 (TRUE = enable)
Input	xScene_4	BOOL	FALSE	Enable / disable scene 4 (TRUE = enable)
Input	xScene_5	BOOL	FALSE	Enable / disable scene 5 (TRUE = enable)
Input	xScene_6	BOOL	FALSE	Enable / disable scene 6 (TRUE = enable)
Input	xScene_7	BOOL	FALSE	Enable / disable scene 7 (TRUE = enable)
Input	xScene_8	BOOL	FALSE	Enable / disable scene 8 (TRUE = enable)
Input	xDisplCondens	BOOL	FALSE	Enable / disable icon for condensation (TRUE = enable)
Input	xDisplWindowOpen	BOOL	FALSE	Enable / disable icon for open window (TRUE = enable)
Input	xDisplHeat	BOOL	FALSE	Enable / disable icon for heating mode (TRUE = enable)
Input	xDisplCool	BOOL	FALSE	Enable / disable icon for cooling mode (TRUE = enable)
Input	xDisplWarn	BOOL	FALSE	Enable / disable icon for warning (TRUE = enable)
Input	xPresence	BOOL	FALSE	Enable / disable presence (TRUE = presence)
Input	xEcoMode	BOOL	FALSE	Enable / disable ECO operating mode (TRUE = enable)
Input	rPositionShade_1	REAL	0.0	Position of shading 1 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_1	REAL	0.0	Slat position of shading 1 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	rPositionShade_2	REAL	0.0	Position of shading 2 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_2	REAL	0.0	Slat position of shading 2 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	rPositionShade_3	REAL	0.0	Position of the shading 3 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_3	REAL	0.0	Position of the slats of the shading 3 (0.0 = horizontal, symmetrical e.g. +/- 80 degrees)
Input	rPositionShade_4	REAL	0.0	Position of shading 4 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_4	REAL	0.0	Slat position of shading 4 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	rPositionShade_5	REAL	0.0	Position of shading 5 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_5	REAL	0.0	Slat position of shading 5 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	rPositionShade_6	REAL	0.0	Position of shading 6 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_6	REAL	0.0	Slat position of shading 6 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	rPositionShade_7	REAL	0.0	Position of shading 7 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_7	REAL	0.0	Slat position of shading 7 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	rPositionShade_8	REAL	0.0	Position of shading 8 (0.0 = fully open, 100.0 = fully closed)
Input	rSlatShade_8	REAL	0.0	Slat position of shading 8 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Input	wFavouriteBut_1	WORD	0	Function of favorite button 1 (0 = no function)
Input	wFavouriteBut_2	WORD	0	Function of favorite button 2 (0 = no function)
Input	wFavouriteBut_3	WORD	0	Function of favorite button 3 (0 = no function)
Input	wFavouriteBut_4	WORD	0	Function of favorite button 4 (0 = no function)
Input	wFavouriteBut_5	WORD	0	Function of favorite button 5 (0 = no function)
Input	wDateJJJJ	WORD	2020	Setting of the current year
Input	wDateMM	WORD	1	Setting of the current month
Input	wDateDD	WORD	1	Setting of the current day
Input	wTimeHH	WORD	0	Setting of the current number of hours
Input	wTimeMM	WORD	0	Setting of the current number of minutes
Input	wTimeSS	WORD	0	Setting of the current number of seconds
Input	xChangeDateTime	BOOL	FALSE	Adoption of inputs wDateJJJJ, wDateMM, wDateDD, wTimeHH, wTimeMM and wTimeSS (on every rising edge)
Input	xResetDevice	BOOL	FALSE	Reset of the device (on every rising edge)
Inout	ModbusClient	ModbusClientBase		Client of the device
Output	rSetpTemp	REAL		Set temperature (degrees Celsius)
Output	rRoomTemp	REAL		Room temperature in XXX.X degrees Celsius
Output	rRelativeHumidity	REAL		Relative room humidity in XXX percent
Output	rAbsoluteHumidity	REAL		Absolute room humidity in XXX.X g/m3
Output	rDewpointTemp	REAL		Dew point temperature in XXX.X degrees Celsius
Output	rCO2	REAL		CO2 content in XXX ppm
Output	rVOC	REAL		VOC content in XXX percent
Output	rCO2_VOC_Mix	REAL		Mixed value from CO2 and VOC content in XXX percent
Output	xSensorOffsetInDevice	BOOL		Indication of whether the sensors must be calibrated in the device (TRUE = calibration in the device required, FALSE = calibration in the FB required)
Output	xPresence_Fb	BOOL		Enable / disable presence (TRUE = presence)
Output	xEcoMode_Fb	BOOL		Enable / disable ECO operating mode (TRUE = enable)
Output	eFanSpeedUser	THERMOKON_NOVOS_TOUCH_FAN_SPEED_CODE	THERMOKON_NOVOS_TOUCH_FAN_SPEED_CODE.OFF	Fan speed level (set by the user on the NOVOS Touch) (0 = OFF, 1 .. 5 = levels 1 .. 5, 6 = AUTO)
Output	eFanSpeedBMS	THERMOKON_NOVOS_TOUCH_FAN_SPEED_CODE	THERMOKON_NOVOS_TOUCH_FAN_SPEED_CODE.OFF	Fan speed level (specified by the BMS) (0 = OFF, 1 .. 5 = levels 1 .. 5, 6 = AUTO, 7 .. 12 = AUTO LEVEL 0 - AUTO LEVEL 5)
Output	xLight_1_Fb	BOOL		Enable / disable lighting 1 (TRUE = enable)
Output	rBrightLight_1_Fb	REAL		Brightness of lighting 1 (100.0 = maximum)
Output	xUpLight_1	BOOL		Command increase brightness for lighting 1
Output	xDownLight_1	BOOL		Command decrease brightness for lighting 1
Output	xLight_2_Fb	BOOL		Enable / disable lighting 1 (TRUE = enable)
Output	rBrightLight_2_Fb	REAL		Brightness of lighting 2 (100.0 = maximum)
Output	xUpLight_2	BOOL		Command increase brightness for lighting 2
Output	xDownLight_2	BOOL		Command decrease brightness for lighting 2
Output	xLight_3_Fb	BOOL		Enable / disable lighting 1 (TRUE = enable)
Output	rBrightLight_3_Fb	REAL		Brightness of lighting 3 (100.0 = maximum)
Output	xUpLight_3	BOOL		Command increase brightness for lighting 3
Output	xDownLight_3	BOOL		Command decrease brightness for lighting 3
Output	xLight_4_Fb	BOOL		Enable / disable lighting 1 (TRUE = enable)
Output	rBrightLight_4_Fb	REAL		Brightness of lighting 4 (100.0 = maximum)
Output	xUpLight_4	BOOL		Command increase brightness for lighting 4
Output	xDownLight_4	BOOL		Command decrease brightness for lighting 4
Output	xLight_5_Fb	BOOL		Enable / disable lighting 5 (TRUE = enable)
Output	rBrightLight_5_Fb	REAL		Brightness of lighting 5 (100.0 = maximum)
Output	xUpLight_5	BOOL		Command increase brightness for lighting 5
Output	xDownLight_5	BOOL		Command decrease brightness for lighting 5
Output	xLight_6_Fb	BOOL		Enable / disable lighting 6 (TRUE = enable)
Output	rBrightLight_6_Fb	REAL		Brightness of lighting 6 (100.0 = maximum)
Output	xUpLight_6	BOOL		Command increase brightness for lighting 6
Output	xDownLight_6	BOOL		Command decrease brightness for lighting 6
Output	xLight_7_Fb	BOOL		Enable / disable lighting 7 (TRUE = enable)
Output	rBrightLight_7_Fb	REAL		Brightness of lighting 7 (100.0 = maximum)
Output	xUpLight_7	BOOL		Command increase brightness for lighting 7
Output	xDownLight_7	BOOL		Command decrease brightness for lighting 7
Output	xLight_8_Fb	BOOL		Enable / disable lighting 8 (TRUE = enable)
Output	rBrightLight_8_Fb	REAL		Brightness of lighting 8 (100.0 = maximum)
Output	xUpLight_8	BOOL		Command increase brightness for lighting 8
Output	xDownLight_8	BOOL		Command decrease brightness for lighting 8
Output	xScene_1_Fb	BOOL		Enable / disable scene 1 (TRUE = enable)
Output	xScene_2_Fb	BOOL		Enable / disable scene 2 (TRUE = enable)
Output	xScene_3_Fb	BOOL		Enable / disable scene 3 (TRUE = enable)
Output	xScene_4_Fb	BOOL		Enable / disable scene 4 (TRUE = enable)
Output	xScene_5_Fb	BOOL		Enable / disable scene 5 (TRUE = enable)
Output	xScene_6_Fb	BOOL		Enable / disable scene 6 (TRUE = enable)
Output	xScene_7_Fb	BOOL		Enable / disable scene 7 (TRUE = enable)
Output	xScene_8_Fb	BOOL		Enable / disable scene 8 (TRUE = enable)
Output	rPositionShade_1_Fb	REAL		Position of shading 1 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_1_Fb	REAL		Slat position of shading 1 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_1	BOOL		UP command for shading 1
Output	xDownShade_1	BOOL		DOWN command for shading 1
Output	rPositionShade_2_Fb	REAL		Position of shading 2 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_2_Fb	REAL		Slat position of shading 2 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_2	BOOL		UP command for shading 2
Output	xDownShade_2	BOOL		DOWN command for shading 2
Output	rPositionShade_3_Fb	REAL		Position of the shading 3 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_3_Fb	REAL		Position of the slats of the shading 3 (0.0 = horizontal, symmetrical e.g. +/- 80 degrees)
Output	xUpShade_3	BOOL		UP command for shading 3
Output	xDownShade_3	BOOL		DOWN command for shading 3
Output	rPositionShade_4_Fb	REAL		Position of shading 4 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_4_Fb	REAL		Slat position of shading 4 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_4	BOOL		UP command for shading 4
Output	xDownShade_4	BOOL		DOWN command for shading 4
Output	rPositionShade_5_Fb	REAL		Position of shading 5 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_5_Fb	REAL		Slat position of shading 5 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_5	BOOL		UP command for shading 5
Output	xDownShade_5	BOOL		DOWN command for shading 5
Output	rPositionShade_6_Fb	REAL		Position of shading 6 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_6_Fb	REAL		Slat position of shading 6 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_6	BOOL		UP command for shading 6
Output	xDownShade_6	BOOL		DOWN command for shading 6
Output	rPositionShade_7_Fb	REAL		Position of shading 7 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_7_Fb	REAL		Slat position of shading 7 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_7	BOOL		UP command for shading 7
Output	xDownShade_7	BOOL		DOWN command for shading 7
Output	rPositionShade_8_Fb	REAL		Position of shading 8 (0.0 = fully open, 100.0 = fully closed)
Output	rSlatShade_8_Fb	REAL		Slat position of shading 8 (0.0 = horizontal, symmetric e.g. +/- 80 degrees)
Output	xUpShade_8	BOOL		UP command for shading 8
Output	xDownShade_8	BOOL		DOWN command for shading 8
Output	xDigitalInput	BOOL		State of the digital input on terminal 7 (TRUE = loop closed with GND)
Output	xAlarm	BOOL	FALSE	Collective fault (TRUE = fault)
Output	xAlarmCom	BOOL	FALSE	Collective fault - communication (TRUE = fault)
Output	eErrorCodeCom	ModbusErrorCode		Error code - communication (0 = no error)
Output	stErrorCodeDev	STRING		String with the numbers of the active device errors
Output	xBusy	BOOL		Communication indicator (TRUE = communication)
Input Const	rVOCOffset	REAL	0.0	Constant measured-value offset for the transmitted VOC - actual value (increment: 1.0)
Input Const	rCO2Offset	REAL	0.0	Constant measured-value offset for the transmitted CO2 - actual value (increment: 1.0 ppm)
Input Const	rRelativeHumidityOffset	REAL	0.0	Constant measured-value offset for the transmitted relative humidity actual value (increment: 1.0 %rH)
Input Const	rRoomTempOffset	REAL	0.0	Constant measured-value offset for the transmitted temperature - actual value (+/- 3 K) (increment: 0.1 K)
Input Const	wTimeLongKeystroke	WORD	1000	Time duration for detection of the long button press ( duration in milliseconds)
Input Const	wIconScene_8	WORD	0	Icon of scene 8 (0 = Work)
Input Const	sNameScene_8	STRING(12)	‘SCENE 8’	Name of scene 8 (maximum 12 characters)
Input Const	wIconScene_7	WORD	0	Icon of scene 7 (0 = Work)
Input Const	sNameScene_7	STRING(12)	‘SCENE 7’	Name of scene 7 (maximum 12 characters)
Input Const	wIconScene_6	WORD	0	Icon of scene 6 (0 = Work)
Input Const	sNameScene_6	STRING(12)	‘SCENE 6’	Name of scene 6 (maximum 12 characters)
Input Const	wIconScene_5	WORD	0	Icon of scene 5 (0 = Work)
Input Const	sNameScene_5	STRING(12)	‘SCENE 5’	Name of scene 5 (maximum 12 characters)
Input Const	wIconScene_4	WORD	0	Icon of scene 4 (0 = Work)
Input Const	sNameScene_4	STRING(12)	‘SCENE 4’	Name of scene 4 (maximum 12 characters)
Input Const	wIconScene_3	WORD	0	Icon of scene 3 (0 = Work)
Input Const	sNameScene_3	STRING(12)	‘SCENE 3’	Name of scene 3 (maximum 12 characters)
Input Const	wIconScene_2	WORD	0	Icon of scene 2 (0 = Work)
Input Const	sNameScene_2	STRING(12)	‘SCENE 2’	Name of scene 2 (maximum 12 characters)
Input Const	wIconScene_1	WORD	0	Icon of scene 1 (0 = Work)
Input Const	sNameScene_1	STRING(12)	‘SCENE 1’	Name of scene 1 (maximum 12 characters)
Input Const	wSceneNumber	WORD	0	Number of available scenes (1 - 8)
Input Const	xDispMenuScene	BOOL	FALSE	Enable / disable the menu Scene (FALSE = disable)
Input Const	wAdjustModeShade_8	WORD	0	Type of adjustment for shading 8 (0 = Slider)
Input Const	wIconShade_8	WORD	0	Icon of shading 8 (0 = Venetian blind)
Input Const	sNameShade_8	STRING(12)	‘VENETIAN BLIND 8’	Name of shading 8 (maximum 12 characters)
Input Const	wAdjustModeShade_7	WORD	0	Type of adjustment for shading 7 (0 = Slider)
Input Const	wIconShade_7	WORD	0	Icon of shading 7 (0 = Venetian blind)
Input Const	sNameShade_7	STRING(12)	‘VENETIAN BLIND 7’	Name of shading 7 (maximum 12 characters)
Input Const	wAdjustModeShade_6	WORD	0	Type of adjustment for shading 6 (0 = Slider)
Input Const	wIconShade_6	WORD	0	Icon of shading 6 (0 = Venetian blind)
Input Const	sNameShade_6	STRING(12)	‘VENETIAN BLIND 6’	Name of shading 6 (maximum 12 characters)
Input Const	wAdjustModeShade_5	WORD	0	Type of adjustment for shading 5 (0 = Slider)
Input Const	wIconShade_5	WORD	0	Icon of shading 5 (0 = Venetian blind)
Input Const	sNameShade_5	STRING(12)	‘VENETIAN BLIND 5’	Name of shading 5 (maximum 12 characters)
Input Const	wAdjustModeShade_4	WORD	0	Type of adjustment for shading 4 (0 = Slider)
Input Const	wIconShade_4	WORD	0	Icon of shading 4 (0 = Venetian blind)
Input Const	sNameShade_4	STRING(12)	‘VENETIAN BLIND 4’	Name of shading 4 (maximum 12 characters)
Input Const	wAdjustModeShade_3	WORD	0	Type of adjustment for shading 3 (0 = Slider)
Input Const	wIconShade_3	WORD	0	Icon of shading 3 (0 = Venetian blind)
Input Const	sNameShade_3	STRING(12)	‘VENETIAN BLIND 3’	Name of shading 3 (maximum 12 characters)
Input Const	wAdjustModeShade_2	WORD	0	Type of adjustment for shading 2 (0 = Slider)
Input Const	wIconShade_2	WORD	0	Icon of shading 2 (0 = Venetian blind)
Input Const	sNameShade_2	STRING(12)	‘VENETIAN BLIND 2’	Name of shading 2 (maximum 12 characters)
Input Const	wAdjustModeShade_1	WORD	0	Type of shading adjustment 1 (0 = slider)
Input Const	wIconShade_1	WORD	0	Icon of shading 1 (0 = Venetian blind)
Input Const	sNameShade_1	STRING(12)	‘VENETIAN BLIND 1’	Name of shading 1 (maximum 12 characters)
Input Const	wShadeIntervall	WORD	10	Definition of the step size for opening/closing all shadings (0 - 100 %)
Input Const	wSlatIntervall	WORD	20	Definition of the step size for slat adjustment of all shadings (0 - 90)
Input Const	iAdjustSlatMax	INT	80	Definition of the maximum slat position of all shadings (-90 … +90 degrees)
Input Const	iAdjustSlatMin	INT	-80	Definition of the minimum slat position of all shadings (-90 … +90 degrees)
Input Const	xAdjustSlat	BOOL	FALSE	Definition of the adjustability of the slats of all shadings (FALSE = slats not adjustable)
Input Const	wShadeNumber	WORD	0	Number of available shadings (1 - 8)
Input Const	xDispMenuShade	BOOL	FALSE	Enable / disable the menu Shading (FALSE = disable)
Input Const	wAdjustModeLight_8	WORD	0	Type of adjustment of the brightness of lighting circuit 8 (0 = Slider)
Input Const	wIconLight_8	WORD	0	Icon of lighting circuit 8 (0 = universal light bulb)
Input Const	sNameLight_8	STRING(12)	‘LIGHT 8’	Name of lighting circuit 8 (maximum 12 characters)
Input Const	wAdjustModeLight_7	WORD	0	Type of adjustment of the brightness of lighting circuit 7 (0 = Slider)
Input Const	wIconLight_7	WORD	0	Icon of lighting circuit 7 (0 = universal light bulb)
Input Const	sNameLight_7	STRING(12)	‘LIGHT 7’	Name of lighting circuit 7 (maximum 12 characters)
Input Const	wAdjustModeLight_6	WORD	0	Type of adjustment of the brightness of lighting circuit 6 (0 = Slider)
Input Const	wIconLight_6	WORD	0	Icon of lighting circuit 6 (0 = universal light bulb)
Input Const	sNameLight_6	STRING(12)	‘LIGHT 6’	Name of lighting circuit 6 (maximum 12 characters)
Input Const	wAdjustModeLight_5	WORD	0	Type of adjustment of the brightness of lighting circuit 5 (0 = Slider)
Input Const	wIconLight_5	WORD	0	Icon of lighting circuit 5 (0 = Universal light bulb)
Input Const	sNameLight_5	STRING(12)	‘LIGHT 5’	Name of lighting circuit 5 (maximum 12 characters)
Input Const	wAdjustModeLight_4	WORD	0	Type of adjustment of the brightness of lighting circuit 4 (0 = Slider)
Input Const	wIconLight_4	WORD	0	Icon of lighting circuit 4 (0 = Universal light bulb)
Input Const	sNameLight_4	STRING(12)	‘LIGHT 4’	Name of lighting circuit 4 (maximum 12 characters)
Input Const	wAdjustModeLight_3	WORD	0	Type of adjustment of the brightness of lighting circuit 3 (0 = Slider)
Input Const	wIconLight_3	WORD	0	Icon of lighting circuit 3 (0 = Universal light bulb)
Input Const	sNameLight_3	STRING(12)	‘LIGHT 3’	Name of lighting circuit 3 (maximum 12 characters)
Input Const	wAdjustModeLight_2	WORD	0	Type of adjustment of the brightness of lighting circuit 2 (0 = Slider)
Input Const	wIconLight_2	WORD	0	Icon of lighting circuit 2 (0 = Universal light bulb)
Input Const	sNameLight_2	STRING(12)	‘LIGHT 2’	Name of lighting circuit 2 (maximum 12 characters)
Input Const	wAdjustModeLight_1	WORD	0	Type of adjustment of the brightness of lighting circuit 1 (0 = Slider)
Input Const	wIconLight_1	WORD	0	Icon of lighting circuit 1 (0 = Universal light bulb)
Input Const	sNameLight_1	STRING(12)	‘LIGHT 1’	Name of lighting circuit 1 (maximum 12 characters)
Input Const	wDimmingIntervall	WORD	5	Definition of the step size for dimming all lighting circuits (0 - 100 %)
Input Const	xDimmingLight	BOOL	FALSE	Definition of the dimming capability of all lighting circuits ( FALSE = not dimmable)
Input Const	wLightNumber	WORD	0	Number of available lights (1 - 8)
Input Const	xDispMenuLight	BOOL	FALSE	Enable / disable the menu Lighting (FALSE = disable)
Input Const	wDispTemp	WORD	1	Selection of the temperatures to be displayed on the home screen ( Bit 0 = room temperature, Bit 1 = setpoint temperature, Bit = 0 = off)
Input Const	wFanSpeedMin	WORD	0	Minimum selectable fan speed
Input Const	wFanSpeedNumber	WORD	3	Number of available fan speeds (0 - wFanSpeedNumber)
Input Const	xDispMenuFan	BOOL	FALSE	Enable / disable the ‘Ventilation’ menu (FALSE = disabled)
Input Const	xDispMenuTemp	BOOL	FALSE	Enable / disable the menu Room climate (FALSE = disabled )
Input Const	wTimeMode	WORD	0	Setting the time format (0 = off, 1 = 12h, 2 = 24h)
Input Const	wDateMode	WORD	0	Setting the date format (0 = off, 1 = DDMMYY, 2 = YYMMDD)
Input Const	tTimeUpdateConfig	TIME	TIME#0ms	Update interval for the processes influenced by the input xUpdateConfig influenced
Input Const	tTimeUpdateSetp	TIME	TIME#45s0ms	Update interval for the processes influenced by the input xUpdateSetp influenced
Input Const	tTimeUpdateStates	TIME	TIME#1s0ms	Update interval for the processes influenced by the input xUpdateStates influenced
Input Const	tTimeUpdateActual	TIME	TIME#3s0ms	Update interval for the processes influenced by the input xUpdateActual influenced