Ctrlk
ContactpowerIO Website
For the complete documentation index, see llms.txt. This page is also available as Markdown.

HVAC Visualization Library

Download and changelog page for the HVAC visualization

Current version

3.3.0.2 - HVACV CODESYS 3.5.21.2 - Download

Release Date 18.08.2026

Changes

  • Reset button removed in the following frames

    • IO2_H1_16DI

    • IO2_H1_4DIOR

    • IO2_H1_8AI

    • IO2_H1_8AO

    • IO2_H1_8DO

    • IO2_H1_8DOR

Older versions

3.3.0.1 - HVACV CODESYS 3.5.21.2 - Download

Release Date 24.07.2026

Changes

  • H1.8DO-R: correction of type designation

  • SystemInfo

New Visu frames

  • SPLUSS_AFTM_LQ_CO2_MOD

  • SPLUSS_RFTM_LQ_PS_CO2_WITHOUT_POT_REV2022_MOD

  • SPLUSS_KFTM_LQ_CO2_MOD

  • SPLUSS_714x_MOD

  • SPLUSS_724x_MOD

  • SPLUSS_11DX_MOD

  • NetworkInfo

  • BELIMO_P_22RTX_1U00X_2

3.2.0.29 - HVACV CODESYS 3.5.17.2 - Download

Release Date 14.08.2025

Changes

  • DisplayULINT: decimal place removed

  • Correction of text lists TL_SBus_W200_SensorType and TL_SBus_W340_SensorType

New Visu frames

  • DisplayUNIT

  • DisplayLINT

  • POWERIO_T1_BSK1_XXX_EASY

  • TwoPoint

3.2.0.24 - HVACV CODESYS 3.5.17.2 - Download

Release Date 29.04.2025

Changes

  • FanControlParameter: added the missing variable rMinHAValue

  • FB IO2_H1_8AI: sensor fault display added

  • DANFOSS_NOVOCON: input limits for design volume flow increased from 1000 to 99999

  • DANFOSS_NOVOCON: device error code display added

  • GRUNDFOS_MAGNA_3_MONO: adjustment of some variables adapted according to HVACModus library V1.1.0.39

New Visu frames

  • EditUint

  • DisplayULINT

  • SPLUSS_LCD_SHD_MODBUS

  • FINDER_7E_46_8_400_0212

  • FINDER_7E_78_8_400_0212

  • FINDER_7M_24_8_230_0212

  • FINDER_7M_38_8_400_0212

  • ABB_B21_23_24

  • SBus_PCDStationIO

  • SBus_PCDx_A400

  • SBus_PCDx_A46x

  • SBus_PCDx_A810

  • SBus_PCDx_E110

  • SBus_PCDx_E16x

  • SBus_PCDx_W200

  • SBus_PCDx_W220

  • SBus_PCDx_W340

  • SBus_PCDx_W400

  • SBus_PCDx_W800

  • LOYTEC_LSTAT_80X_GX_LX_MOD

  • THIES_WSC11_MOD

  • POWERIO_T1_BSK1_XXX_ECO_EASY

3.2.0.17 - HVACV CODESYS 3.5.17.2 - Download

Release Date 16.07.2024

New Visu frames

  • BELIMO_CQ24A_BAC_MOD

  • BELIMO_LR24A_MOD_V2

  • BELIMO_VSR24A_LP1_MOD

  • SPLUSS_RYMASKON_2XX_MOD_V2_RBG

3.2.0.16 - HVACV CODESYS 3.5.17.2 - Download

Release Date 25.04.2024

New Visu frames

  • for IOs H1.Mxxx

  • DisplayAutoAlarmHandHint

3.2.0.15 - HVACV CODESYS 3.5.17.2 - Download

Release Date 20.01.2024

Fixes for errors from version 3.2.0.14. Affected Visu frames:

  • THERMOKON_WRF07

  • THERMOKON_WRF07_CO2_VOC

3.2.0.14 - HVACV CODESYS 3.5.17.2 - Download

Release Date 20.01.2024

New functions

  • Visu frame THERMOKON_WRF07

  • Visu frame THERMOKON_WRF07_CO2_VOC

  • Visu frame SPLUSS_FSFTM_POTI_MOD

  • Visu frame SPLUSS_FSFTM_CO2_POTI_MOD

  • Visu frame SPLUSS_RFTM_XXX_MOD

Changes

  • Measured value adjustment added:

    • SPLUSS_FSFTM_MOD

    • SPLUSS_FSFTM_CO2_MOD

    • SPLUSS_AFTF_MOD

    • SPLUSS_KFTF_MOD

    • SPLUSS_RPFTF_MOD

    • SPLUSS_RTM1_MOD

    • SPLUSS_TW_MOD

    • SPLUSS_VFTF_MOD

    • SPLUSS_8147_MOD_LCD

    • SPLUSS_8148_MOD_LCD

    • SPLUSS_RYMASKON_2XX_MOD

    • SPLUSS_RYMASKON_2XX_MOD_V2

  • Measured value adjustment and variable 'xDisplayAvailable' added:

    • SPLUSS_2327_MOD_LCD

    • SPLUSS_2328_MOD_LCD

    • SPLUSS_ALTM1_MOD

    • SPLUSS_ALTM2_MOD

    • SPLUSS_ATM2_MOD

    • SPLUSS_HFTM_MOD

    • SPLUSS_KFTM_LQ_CO2_MOD

    • SPLUSS_MWTM_MOD

    • SPLUSS_RPTM1_MOD

    • SPLUSS_RPTM2_MOD

    • SPLUSS_TM65_MOD

  • Visu frame SPLUSS_FSFTM_CO2_MOD: measured value adjustment added

3.2.0.12 - HVACV CODESYS 3.5.17.2 - Download

Release Date 11.12.2023

New functions

  • Visu frame BELIMO_SF24A_MOD

  • Visu frame BELIMO_GR24A_MOD_5

  • Visu frame BELIMO_LMV_D3

  • Visu frame BELIMO_VRU_D3_BAC_EASY

  • Visu frame BELIMO_VRU_D3_BAC_FULL

  • Introduction of parameters for measured value adjustment (=offset) for the first FBs

Changes

  • Visu frame FanControlParameter: decimal place for variable Kp increased to 2

  • Visu frame ControlPI: decimal place for variable Kp increased to 2

  • Adjustment of Danfoss_Novocon

3.2.0.11 - HVACV CODESYS 3.5.17.2 - Download

Release Date 17.11.2023

New functions

  • Visu frame DisplayRealVisu

  • Visu frame Danfoss Novocon

3.2.0.8 - HVACV CODESYS 3.5.17.2 - Download

Release Date 22.09.2023

New features and changes

  • new Visu frame BELIMO_C615QP_B_MOD

  • In the FBs ebm_serien_84_112_150_200_v... setpoint unit and field width of serial number adjusted

3.2.0.7 - HVACV CODESYS 3.5.17.2 - Download

Release Date 18.09.2023

New functions

  • Visu frame for ebm pabst fans V6.3

  • Visu frame Display DWord

3.2.0.6 - HVACV CODESYS 3.5.17.2 - Download

Release Date 17.08.2023

New features and changes

  • Image ClockAssignmentOverview_Start_V2 expanded from 64 to 144 clocks

3.2.0.5 - HVACV CODESYS 3.5.17.2 - Download

Release Date 13.06.2023

New features and changes

  • Access permissions for individual elements in FB_MacroInfoParameter adjusted

3.2.0.4 - HVACV CODESYS 3.5.17.2 - Download

Release Date 15.05.2023

New features and changes

  • New Visu frames for HVACModbusIO2 IO modules

3.2.0.3 - HVACV CODESYS 3.5.17.2 - Download

Release Date 11.04.2023

New features and changes

  • New Visu frames for HVACModbusIO2 IO modules

  • S_PLUS_S Rymaskon Frame V2 for Rymaskon 2xx

  • New Visu frames for ebm papst fans from the HVACModbus library

Bug fix

  • Text list TL_eDOSafestate corrected (HAN ON / OFF swapped)

3.2.0.2 - HVACV CODESYS 3.5.17.2 - Download

Release Date 12.12.2022

New features and changes

  • In the Clockmaster clock system, the clock can be switched to define whether it is used as switch-on time or switch-off time. This makes the clock even more flexible across the 00:00 boundary.

  • In the FILTER visualization element for ventilation systems, a small circle appears as soon as the filter message is active, without waiting time - so service does not have to wait for the time.

  • If the HVAC.Pump is in the run-on time, this is displayed as time in the pump in the Visu frame PUMP.

From version HVACV 3.2.0.2, HVAC 3.2.1.6 is required

3.2.0.1 - HVACV CODESYS 3.5.17.2 - Download

Release Date 14.10.2022

New features and changes

  • LoginKeypad added. User Visu login can now also be assigned a password with characters, not just numbers (numpad).

3.1.0.18 - HVACV CODESYS 3.5.14.0 - Download

Release Date 06.07.2021

New features and changes

  • n.a.

Last updated