Description

The HVAC KNX library allows KNX IP data to be retrieved directly from the program via KNX IP interfaces using UDP. For this purpose, the master function block is placed and the individual group address function blocks are linked to the master.

So you can get started right away, we offer the library for download. A license can be purchased through the CODESYS Store. If you need further assistance, please do not hesitate to contact us.

Download Purchase license Get support

Overview

Function blocks optimized for practical use. Easy use of KNX with a master function block and a slave function block.

Description

The HVAC KNX SL includes function blocks for KNX communication and is specially optimized for the CFC editor. A master block (Master UDP) serves as the base to which "slave" blocks are connected. These blocks are linked via an interface. The library includes DPT read and write blocks as well as the most common DPT datapoint function blocks.

Configuration is done directly on the block without additional mapping by entering the group address. The KNX IP interface monitors the bus, so the data appears immediately on the block in the correct format. When sending, care must be taken not to cause "flooding" on the KNX bus to avoid speed and response issues in the KNX network.

Details