Project template - I/O

This project serves as a copy template for the starter project Empty and provides fully pre-addressed IO types. This allows IOs to be adopted into the project template very quickly and used both in the device tree and – recommended – in the CFC editor.

---

So you can get started right away, we offer this project as a download. If you need further assistance, please do not hesitate to contact us.

Download Get support

The project was created and tested in the specified CODESYS version. It is therefore recommended to use this CODESYS version.

Overview

This project serves as a copy template for the starter project "empty". All IO types are already addressed and arranged. This allows the IOs to be copied into the project template very quickly. There are 2 ways to use the HVAC IOs:

1. In the device tree

2. In the CFC editor (recommended for integrated IO value handling)

The project was created and tested in the specified CODESYS version. It is therefore recommended to use this CODESYS version.